These are the known mechanical and performance specifications for your 2011 Norton Commando 961SE.
Basic Specs
Engine
Displacement961.00 ccm (58.64 cubic inches)
TypeEngine developed by Norton and F1 engine builders, MCT of Oxfordshire, England. Parallel twin with push-rod valve actuation, dry sump, 3 bearing crank and balancer shaft.
DetailsTwin, four-stroke
Max RPM
Compression10.1:1
Bore/Stroke88.0 x 79.0 mm (3.5 x 3.1 inches)
Valves/Cylinder2
FuelingInjection
IgnitionCrank fired electronic
Exhaust1 3/4 inch header system with merged collector and twin mufflers with catalytic converters. Euro 3.
LubricationDry sump
CoolingAir
Drivetrain
Gearbox5-speed
Final DriveChain
ClutchWet multi-plate hydraulic lifter
DrivelineConstant mesh 5 speed. Final drive: 525 “O” ring chain
Performance
Horespower80.00 HP (58.4 kW)
Torque90.00 Nm (9.2 kgf-m or 66.4 ft.lbs)
Top Speed
Fuel Economy & Polution
Fuel Consumption
Fuel Capacity17.03 litres (4.50 gallons)
Emissions
Chassis
Frame TypeSteel tubular with integral oil tank
Rake24.5°
Trail99 mm (3.9 inches)
Front Suspension43mm Ohlins RWU
Front Travel115 mm (4.5 inches)
Rear SuspensionOhlins reservoir-style twin shocks
Rear Travel110 mm (4.3 inches)
Seat
Seat Height813 mm (32.0 inches) If adjustable, lowest setting.
Alt. Seat Height
Total Height
Total Length
Total Width
Ground Clearance
Wheelbase1,420 mm (55.9 inches)
Dry Weight188.0 kg (414.5 pounds)
Wet Weight
Wheels & Brakes
Front Tire/Tyre120/70-17
Rear Tire/Tyre180/55-17
Front BrakesDouble disc. Full Brembo system, twin semi-floating hi carbon stainless steel discs, Brembo 4 piston “Gold Line” axial callipers
Front Brake Diameter320 mm (12.6 inches)
Rear BrakesSingle disc. Full Brembo system, 2 piston “Gold Line” calliper
Rear Brake Diameter220 mm (8.7 inches)
WheelsFront wheel: 3.50 x 17” BST Carbon Fibre. Rear wheel: 5.0 x 17” BST Carbon Fibre
Comments